Cinside CPR4 Manual de usuario descargar pdf (Pagina 11)

11 | P a g e

Files and CPR III programming

CPR 4 Loader is compatible with all versions of CPR III. Specifically, versions 6.x, 7.x,

8.x and 9.x.

CPR 4 Loader needs to have the programming files from the computer running CPR III

placed in it. This is easily done with a flash or jump drive using the following procedure:

1. On the computer running the CPR III program locate the “c:\rtc\cpr3” directory.

A snapshot of this directory is shown below.

2. Find all files with the extension csv. For example “groups.csv,” “steps.csv” etc.

3. Copy all these files to a flash drive, jump drive, or some other removable media

that can be used on both computers.

4. On the computer running the CPR 4 Loader program locate the “c:\rtc\cpr3”

directory.

5. Copy the files from the jump drive to this directory.

6. Launch the CPR 4 Loader program. The data should be there. The program is

installed in the same directory as the files, “c:\rtc\cpr3.” To launch the program,

you simply double click the file ‘CPR4 Loader.exe’ in the ‘c:\rtc\cpr3\’ directory.

A snapshot of this directory is shown below. (Fig. 11)

Fig. 11

Communications

The CPR 4 Loader program only communicates to one clock at a time with a serial cable.

For the latest generation CPR2102 clocks you can also use the cable part number 504567.

For CPR2102 clocks before 2008 you need the adapter part number 503489. If your

computer does not have a serial port you can use a USB serial port adapter.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Sin comentarios

Cinside CPR4 Manual de usuario Pagina 11